Baumer GB-GXxxx User Manual
Page 19
Manual_EtherCAT_PoE_BIDE_EN.doc 19/19
Baumer IVO GmbH & Co. KG
11.11.10
Villingen-Schwenningen,
Germany
6.4 Bus cover Power over EtherCAT (PoE)
Based on the IEEE-standard 802.3af, the Baumer EtherCAT encoder with PoE bus cover is interacting as PD
(Powered Device) with a corresponding PSE (Power Sourcing Equipment) module. Signal and power
transmission is by 4-wire standard EtherCAT/Ethernet cable (for example CAT-5). The PSE will identify the
encoder as PD after poweron by the procedure specified in IEEE standard 802.3af.
Encoder supply of 48 V must be provided by an auxiliary PSE module (for example Beckhoff EtherCAT
branch EK1132).
PoE encoder at EK1132 EtherCAT-branch
Run
Power OK
Features
- Functionality compliant to standard IEEE Std 802.3af
- Excess temperature protection
- PoE mains unit galvanically insulated
- Hot-Connect feasible (connecting/disconnecting the device during operation)
Technical data
Poe Leistungsklasse:
1 (max. 4 W)
PoE supply voltage:
44..57 VDC
Current consumption:
≤50mA (bei 48 VDC)
Cable length:
max.100 m