8 communication error, Communication error – Baumer Speed switches DSL User Manual
Page 18
Advertising
Baumer_DSL-WinXP_MA_ENBaumer_DSL-WinXP_MA_EN.doc 18/22
Baumer Hübner GmbH
01.11.2010 / bja
Berlin, Germany
8 Communication error
If the communication between the PC and DSL is faulty (for instance, because the connecting cable has
been disconnected or the supply voltage was interrupted) then the following message will appear:
Fig. 16: Communication error
Use Reconnect to establish communication once more – a fresh log-in is not required.
In exceptional cases, the program will have to be stopped and then restarted.
Advertising