Baumer Speed switches DSL - Manual (Page 7)

Baumer_DSL-WinXP_MA_ENBaumer_DSL-WinXP_MA_EN.doc 7/22 Baumer Hübner GmbH
01.11.2010 / bja Berlin, Germany
5 First program start
Before the program start the RS485-Converter has to be connected otherwise the serial interface
used by the converter will not appear in the overview of all usable serial interfaces.
The first time the program is started, a selection screen will appear where you can choose the language for
the user interface and the system interface (Fig. 4). The software version of the user interface is displayed in
the header of this window.
You can use Close program to terminate the software at any time. Parameter changes that have not been
saved will be lost.
5.1 Language setting
Fig. 4 Start screen
Clicking on the national flag will call up a selection of languages that have been implemented for the user
interface. The required language can be selected by clicking on the appropriate national flag.