1 symbols used, Symbols used – Baumer Speed switches DSL User Manual
Page 4
Advertising
Baumer_DSL-WinXP_MA_ENBaumer_DSL-WinXP_MA_EN.doc 4/22
Baumer Hübner GmbH
01.11.2010 / bja
Berlin, Germany
1 Symbols used
The note at the right of the symbol must be observed in all cases.
The following path and file details refer to a CD drive
(use the correct drive letter).
The following path and file details refer to a hard disk
(use the correct drive letter).
Button Symbol for the corresponding button or key in the user interface.
low
Italic text, used here for the voltage level of a switched output (only for DSL.R).
bold Bold italic text, used here for the file paths and file names.
Advertising