Baumer N 155 - Manual (Page 9)

N 155
www.baumer.com 9
4.2.7 Write a number sequence in the lower line of the display „u“ (75h)
The command is for writing a 5-digit number sequence in the lower display line. The sequence is depicted with-
out dot respectively comma. Preceding zeroes as well as both direction arrows are hidden. The upper line is still
showing the current target or number sequence.
The number sequence will remain until any command except „t“, „u“ or „R“ is received by the interface.
Example: (number sequence = 012345)
SOH Adr Cmd Number sequence = 012345 EOT CRC
send
01h 20h 75h 30h 31h 32h 33h 34h 35h 04h B6h
SOH Adr Cmd Number sequence = 012345 EOT CRC
response
01h 20h 75h 30h 31h 32h 33h 34h 35h 04h B6h
Important:
Combining the commands „t“ and „u“ enables a 10-digit number in the display.
Both number sequences are not saved by EEPROM.