Crestron electronic Residential Lighting - Manual (Page 23)

GreenLight Options–CAEN Enclosures Crestron Residential Lighting Design Guide
Doc. 5999F 18
CLX-Series Lighting Control Modules
Model Load Rating
CLX-1DELV4 Four channels of dimming for
electronic low voltage and
incandescent loads Each channel is rated for 1200 watts, with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
NOTE: CLW series dimmers are not compatible with CLX-1DELV4
CLX-1DIM4 Four channels of dimming for
incandescent, magnetic low voltage,
neon/cold cathode, and dimmable
2-wire fluorescent loads Each channel is rated for 1920 watts, with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
CLX-1DIM8 Eight channels of dimming for
incandescent, magnetic low voltage,
neon/cold cathode, and dimmable
2-wire fluorescent loads Each channel is rated for 1920 watts, with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
CLX-2DIM2 Two independent channels of
dimming for incandescent, magnetic
low voltage, neon/cold cathode, and
dimmable 2-wire fluorescent loads. Each channel is rated for 1920 watts; with a total module rating of 3840
watts when fed from two separate 20 A feeds, and a total module rating of
2880 watts when fed from two 15A breakers.
CLX-2DIM8 Eight channels of dimming for
incandescent, magnetic low -voltage,
neon/cold cathode, and dimmable
2-wire fluorescent loads, actually
composed of two independent four-
channel dimmers in a single module Each channel is rated for 1920 watts; with a total module rating of 1920
watts when fed from a 20A breaker. A total module rating of 1440 watts
when fed from a 15A breaker
CLX-1FAN4 Capacitive-type speed control for up
to four ceiling fan motors Each channel provides four preset speed settings plus off and is rated for 2
amps, with a total module rating of 8 amps
CLX-1MC4 Control of up to four bidirectional
motors for drapes, blinds, projection
screens, lifts, etc. Each channel is rated for 10 amps or 1/2 HP, with a total module rating of
16 amps.
CLX-4HSW4 Four independent channels of
switching for high-inrush loads such
as motors, HID lighting, and
fluorescent ballasts, as well as
incandescent, low voltage, and
neon/cold cathode lighting Each channel is rated for 16 amps or 1/2 HP; with a total module rating of
64 amps when fed from four separate 20 amp feeds.