Crestron electronic Residential Lighting - Manual (Page 32)

Crestron Residential Lighting Design Guide DIN Rail Products
Doc. 5999F 27
DIN-8SW8
The DIN-8SW8 is an 8-channel high voltage lighting control
module designed to support switching of non-dimmable
lighting and fans. A single model supports both 120 and 220-
240 volt applications. Each channel handles incandescent
loads up to 10 amps, fluorescent loads up to 5 amps, and
also 1/2 HP motors.
Features
 8 channels of power switching
 Supports 120 to 240 volt 50/60 Hz (Not for 277
VAC operation)
 Override input
 Cresnet® communications
 Setup via front panel or software
 Programmable functionality via DIN-AP2
DIN-4DIMFLV4
The DIN-4DIMFLV4 is a 4-channel lighting control module
designed to support dimming of 4-wire 0-10 volt
fluorescent dimming ballasts. A single model supports both
120 and 220-240 volt applications. Each channel handles
up to 30 dimmable ballasts, and may also be used for
switching of non-dimmable lighting loads up to 5 amps,
as well as 1/2 HP motors.
Features
 4 channels of 4-wire 0-10 volt fluorescent
dimming
 Supports 120 to 240 Volt 50/60 Hz (Not for 277
VAC operation)
 Also allows switching of lighting and exhaust fans
 Setup via front panel or software

Programmable functionality via DIN-AP2
DIN-2MC2
The DIN-2MC2 is a 2-channel motor control module
designed to provide control of bidirectional motors for
drapes, shades, projection screens, lifts, skylights, and
gates. Each channel supports up/down or open/close
control of a conventional 3-wire bidirectional type motor up
to 1/2 HP at voltages up to 240 volts. Built-in timing and
interlock logic make it easy to program the DIN-2MC2 for
failsafe operation.
Features
 Dual-channel bidirectional motor control
 Supports 120 to 240 volt 50/60 Hz
 Setup via front panel or software
 Programmable functionality via DIN-AP2