Crestron electronic Residential Lighting - Manual (Page 30)

Crestron Residential Lighting Design Guide DIN Rail Products
Doc. 5999F 25
DIN-AP2
The DIN-AP2 is a 2-Series control processor designed for small to
medium-sized lighting and automation applications. DIN Rail mounting
enables modular installation alongside Crestron DIN Rail lighting and
automation control modules and other third-party DIN Rail mountable
devices.
Features
 2-Series control engine
 MMC memory expansion card slot
 Cresnet port - master/slave selectable
 10/100 Ethernet | SSL encryption
 e-Control 2, SNMP and RoomView support
 2 bidirectional RS-232 COM ports
 4 IR/serial ports
 8 Versiport I/O ports
 4 Low-voltage relay ports

Configurable via Crestron D3 Pro software
2-Series Processor
Built upon the reliable Crestron 2-Series control engine,
the DIN-AP2 is extensively programmable using the suite
of powerful Crestron development software and vast
database of drivers and software modules. The DIN-AP2
works seamlessly with the entire line of Crestron lighting
dimmers and shade controls, keypads and touchpanels,
thermostats, wireless gateways, and expansion modules.
System Integration
The DIN-AP2 provides for the integration of non-Crestron
devices and subsystems through a host of control
interfaces. Four isolated relays and eight Versiport I/O
ports are built in to accommodate all kinds of sensors,
contactors, door strikes, and other low voltage controls.
Two bidirectional RS-232 COM ports and four IR/serial
ports allow for the integration of everything from simple
shade controllers to advanced security systems.
Cresnet
®
Cresnet is the communications backbone for Crestron
lighting modules, wall box dimmers and shade controllers.
The DIN-AP2 includes a pair of Cresnet master ports
(paralleled) capable of supporting approximately 20
typical devices. Larger systems with more than 20
devices can be handled by adding the DIN-HUB Cresnet
Distribution Hub. Connectivity for multiple homeruns can
be facilitated using one or more DIN-BLOCK Cresnet
Distribution Blocks. Additionally, at least one DIN-PWS50
Cresnet Power Supply is required to power the DIN-AP2
and any connected Cresnet devices.
Memory Expansion
A memory card slot allows for easy expansion of the DIN-
AP2 internal memory using an MMC-compatible memory
card up to 2 GB.
Ethernet and e-Control®2
Built-in 10/100 Ethernet facilitates secure high speed
network connectivity, enabling extensive capabilities for
remote system maintenance and control, and providing an
interface to other Crestron control systems. Native
features include a built-in email client to report system
troubles and other functions to the owner or service
company via instant email notification. An onboard Web
server provides the foundation for the exclusive Crestron
e-Control 2 XPanel technology, providing secure IP-based
remote control.
RoomView® and SNMP
For large facilities utilizing multiple DIN-AP2s and other
control systems, exclusive Crestron RoomView Help Desk
software delivers a comprehensive solution for remote
monitoring and asset management. Also, built-in SNMP
support enables similar capability using third-party
network management software, allowing full control and
monitoring from the IT Help Desk or NOC in a format
that's familiar to IT personnel.
D3 Pro™ Software
Crestron D3 Pro software eliminates the need for custom
programming, providing a complete design, development,
and documentation solution for the lighting professional.