Cisco Linksys SPA9000 User Manual
Page 184
6-36
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
Regional Tab
FXS Port Input Gain
Input gain in dB, up to three decimal places. The range is 6.000 to -12.000.
The default is -3.
FXS Port Output Gain
Output gain in dB, up to three decimal places. The range is 6.000 to -12.000. The Call
Progress Tones and DTMF playback level are not affected by the <FXS Port Output
Gain>.
The default is -3.
DTMF Playback Level
Local DTMF playback level in dBm, up to one decimal place.
The default is -16.0.
DTMF Playback Length
Local DTMF playback duration in milliseconds.
The default is .1.
Detect ABCD
To enable local detection of DTMF ABCD, select yes. Otherwise, select no.
The default is yes. Setting has no effect if DTMF Tx Method is INFO; ABCD is always
sent OOB regardless in this setting.
Playback ABCD
To enable local playback of OOB DTMF ABCD, select yes. Otherwise, select no.
The default is yes.
Caller ID Method
The following choices are available:
•
Bellcore (N.Amer,China)—CID, CIDCW, and VMWI. FSK sent after first ring (same
as ETSI FSK sent after first ring) (
no
polarity reversal or DTAS).
•
DTMF (Finland, Sweden)—CID only. DTMF sent after polarity reversal (and
no
DTAS) and before first ring.
•
DTMF (Denmark)—CID only. DTMF sent after polarity reversal (and
no
DTAS) and
before first ring.
•
ETSI DTMF—CID only. DTMF sent after DTAS (and
no
polarity reversal) and
before first ring.
•
ETSI DTMF With PR—CID only. DTMF sent after polarity reversal and DTAS and
before first ring.
•
ETSI DTMF After Ring—CID only. DTMF sent after first ring (
no
polarity reversal
or DTAS).
•
ETSI FSK—CID, CIDCW, and VMWI. FSK sent after DTAS (but
no
polarity
reversal) and before first ring. Waits for ACK from CPE after DTAS for CIDCW.
•
ETSI FSK With PR (UK)—CID, CIDCW, and VMWI. FSK is sent after polarity
reversal and DTAS and before first ring. Waits for ACK from CPE after DTAS for
CIDCW. Polarity reversal is applied only if equipment is on hook.
The default is Bellcore(N.Amer, China).
Caller ID FSK Standard
The SPA9000 supports bell 202 and v.23 standards for caller ID generation. Select the FSK
standard you want to use, bell 202 or v.23.
The default is bell 202.
Feature Invocation Method
Select the method you want to use, Default or Sweden default. (Not in PAP2T)
The default is Default.