Cisco Linksys SPA9000 User Manual
Page 93
4-3
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 4 Configuring SPA9000 Features
Using the Wizard to Configure SPA9000 Voice Features
•
For SPA92x, 94x, or 925, press Menu on the IP phone and Navigate down to Product Info >
Software Version.
Step 4
If the firmware version is lower than 4.1.12, click Upgrade.
The system displays Page 3, shown in
.
Figure 4-2
Client Station Setup Wizard—Page 3
Step 5
Select the MAC address or station name of the IP phone you are configuring and click Next.
The system displays Page 4, shown in
.
Figure 4-3
Client Station Setup Wizard—Page 3
Step 6
Identify the station name, select an extension number for each available extension, and click Next.
Step 7
Click Finish on Page 5, and if you want to configure additional clients, select the required option on the
final page.