Cisco Linksys SPA9000 - Manual (Page 203)

6-55
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
Line 1/2/3/4 Tab
Proxy Fallback Intvl This parameter sets the delay (sec) after which the PAP2T will retry from the highest
priority proxy (or outbound proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and backup proxy server list is
provided to the PAP2T via DNS SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of priority and so all hosts will
be considered at the same priority and the PAP2T will not attempt to fall back after a fail
over).
The default is 3600
Proxy Redundancy Method PAP2T will make an internal list of proxies returned in DNS SRV records. In normal mode
this list will contain proxies hierarchied by weight and priority
if Based on SRV port is configured the PAP2T does normal first, and also inspect the port
number based on 1
st proxy’s port on the list.
The default is Normal.
Voice Mail Server Identifies the voicemail server.
Mailbox Subscribe Expires Identifies when the mailbox subscription expires.
The default is 30.
Mailbox Subscribe URL URL that should receive the SUBSCRIBE messages, so the SPA9000 receives voicemail
status notification for all mailboxes on this line.
Note: This parameter allows $USER and $PROXY macros, such as $USER@$PROXY
Mailbox Deposit URL URL that the SPA9000 contacts when clients and external callers need to deposit
voicemail in any of the mailboxes on this line.
Default is blank. This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Mailbox Manage URL URL that the IP telephony contacts when it needs to check voicemail for any of the
mailboxes on this line.
Default is blank. This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Mailbox Status Mailbox status for all the mailboxes associated with this line interface. The status is
automatically updated when the SPA9000 receives voicemail status notification from the
ITSP.
Format: [mbs[,mbs[,mbs[,…]]]] where:
• mbs = mbid:new/old
• mbid = mailbox ID, such as 12345
• new = number of new messages in mailbox: 0,1,2,…
• old = number of old messages in mailbox: 0, 1, 2, …
Field Description