Cisco Linksys SPA9000 - Manual (Page 131)

5-7
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 5 Configuring the LVS Auto-Attendant
Configuring Auto-Attendant
Figure 5-6 AA Web Server Configuration Parameters
The following instructions explain how to use the administration web server to configure the nighttime
Auto-Attendant to use Prompt ID 5 as the initial greeting. You can also use these instructions to record
additional prompts and further customize your Auto-Attendant, as long as you also make the appropriate
changes to the sample AA script 2 code.
To configure the nighttime Auto-Attendant, complete the following steps:
Step 1 Direct a browser on the administration computer to the following URL:
http://spa_IP address/admin/voice/advanced
Step 2 The Voice - Info screen appears. Click the SIP tab.
Step 3 On the SIP screen, scroll down to the Auto Attendant Parameters.
Step 4 Copy the default AA script 1 text to the Notepad (or other word processing program).
The following is the default AA script 1 code:
<aa>
<form id=”dir” type=”menu”>
<audio src=”prompt1” bargein=”T”/>
<noinput timeout=”10” repeat=”T”/>
<nomatch repeat=”F”>
<audio src=”prompt3” bargein=”T”/>
</nomatch>
<dialplan src=”dp1”/>
<match>
<default>
<audio src=”prompt2”/>
<xfer name=”ext” target=”$input”/>
</default>
AA Dial Plan 1:
AA Dial Plan 2:
AA script 1:
AA script 2:
AA script 3:
DayTime AA: Day Time:
DayTime AA Script: DayTime Answer Delay:
NightTime AA: NightTime AA Script:
NightTime Answer Delay: Weekend/Holiday AA:
Weekends/Holidays: Weekend/Holiday AA Script:
Weekend/Holiday Answer Delay:
(50xx|xxxx.)
(<:500>x|50xx.)
<aa><form id="dir" type="menu"><audio src="prompt1" bargein="T"/><noi
<aa><form id="gb" type="node"><audio src="prompt4" bargein="T"/><exit
yes start=9:0:0;en
1 12
yes 2
0 yes
w k=6,7;hd=1/ 2
0