Cisco Linksys SPA9000 - Manual (Page 169)

6-21
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
SIP Tab
PBX Phone Parameters
Field Description
Next Auto User ID User-id assigned to the next (unprovisioned) client station that requests initial profile from
the SPA9000 internal configuration server. The parameter is automatically incremented
once a new user-id is assigned.
The default is is 5000.
Phone Ext Password A REGISTRATION password to apply on Ext 1 of all the client stations. If password is
not specified, all stations are allowed to register without being challenged by the
SPA9000.
The default is blank.
Phone Upgrade Rule Upgrade rule for all the client stations. For example:
tftp://192.168.2.207/$PN.bin
Note that the $PN macro is expanded to the product name of the client requesting the
firmware. This allows upgrading phone clients with different firmware using a single rule.
The default is blank.
Phone Dial Plan Dial plan for the client stations.
The default is
(9,[3469]11S0|9,<:1408>[2-9]XXXXXX|9,<:1>[2-9]xxxxxxxxxS0|9,1[2-9]xxxxxxxxxS
0|9,011xx.|9,xx.|[1-8]xxx).
This dial plan tells the phone to do the following:
• play the outside dial tone if the first digit is 9
• dial 9311, 9411, 9611, and 9911 immediately
• dial 9 + [2-9] + 6 digits after a short timeout and insert the 1 + 408 area code
• dial 9 + [2-9] + 9 digits immediately and insert the 1 (domestic long distance)
• dial 91 + [2-9] + 9 digits immediately (domestic long distance)
• dial 9011 + 1 or more digits after timeout or the # (pound) key (international)
• dial 9 + 1 or more digits after timeout or the # (pound) key (catch-all)
• dial [1-8] + 3 more digits immediately (internal calls)