Parameters – Dell PowerVault MD3420 User Manual

Page 192

Advertising
background image

enableSchedule=(TRUE | FALSE)

schedule=(immediate | snapshotSchedule)]

Parameters

Parameter

Description

baseVirtualDisk

The name of the base virtual disk from which you
want to take a snapshot (legacy). Enclose the base
virtual disk name in double quotation marks (" ").

repositoryRAIDLevel

Use this parameter when you create a new disk
group.
The RAID level for the snapshot (legacy) repository

disk group. Valid values are 1, 5, or 6.

repositoryPhysicalDisks

Use this parameter when you create a new disk
group.
The physical disks that you want to assign to the

snapshot (legacy) repository disk group. Specify the

enclosure ID value and the slot ID value for each

physical disk that you assign to the snapshot

(legacy) repository virtual disk. Enclosure ID values

are 0 to 99. Slot ID values are 0 to 31. Enclose the

enclosure ID values and the slot ID values in

parentheses.

repositoryPhysicalDiskCount

Use this parameter when you create a new disk
group.
The number of unassigned physical disks that you

want to use for the snapshot (legacy) repository

disk group.

repositoryDiskGroupUserLabel

Use this parameter when you create a new disk
group.
The name of a new disk group to be used for the

repository virtual disk. Enclose the repository disk

group name in double quotation marks (“ ”).

repositoryDiskGroup

The name of an existing disk group where you
want to place the repository virtual disk. Use this
parameter if you do not want to put the repository
virtual disk in the same disk group as the base
virtual disk. The default is to use the same disk
group for both the base virtual disk and the
repository virtual disk. Enclose the name of the
repository disk group in double quotation marks ("
").

userLabel

The name that you want to give to the snapshots
(legacy) virtual disk. If you do not want to provide a
name, the CLI creates a name using the base
virtual disk user label that you provide.

enclosureLossProtect

The setting to enforce enclosure loss protection
when you create the snapshot (legacy) repository

192

Advertising