Dell PowerVault MD3420 - Manual (Page 220)

NOTE: This command must be run from the command line. It cannot be run in the MD Storage
Manager script editor.
Syntax
supportBundle auto show
Parameters
None.
Display Support Bundle Collection Schedule
Description
This command displays the schedule for collecting support bundles for all storage arrays.
NOTE: This command must be run from the command line. It cannot be run in the MD Storage
Manager script editor.
Syntax
supportBundle schedule show
Parameters
None.
Download Enclosure Management Module Firmware
Description
This command downloads firmware for the enclosure management module.
Syntax
download (allEnclosures | enclosure [enclosureID])
firmware file="filename"
Parameters
Parameter Description
enclosure Identifies the enclosure to which to load new
firmware. Enclosure ID values are 0 to 99.
You must put brackets ([ ]) around the enclosure ID
value.
You can use the following parameters:
• The allEnclosures parameter, which
downloads new firmware to all of the EMMs in
the storage array
220