Dell PowerVault MD3420 - Manual (Page 203)

Parameter Description
snapshot (legacy), set this parameter to online. To
create a virtual disk copy without a snapshot
(legacy), set this parameter to offline.
If this parameter is not used, the virtual disk copy is
created without a snapshot (legacy).
Deactivate Remote Replication (Legacy)
NOTE: This command valid only with Fibre Channel storage arrays.
Description
This command deactivates the Remote Replication (legacy) premium feature, disassembles the
replication repository virtual disk, and releases the RAID controller module owner of the secondary virtual
disk. The RAID controller module host port that is dedicated to the secondary virtual disk is available for
host data transfers.
Syntax
deactivate storageArray feature=remoteReplication
Parameters
None.
Delete Consistency Group
Description
This command deletes a snapshot consistency group in two ways:
• You can delete both the consistency group and the repository virtual disks contained by the
consistency group.
• You can delete only the consistency group and leave the repository virtual disks that are contained by
the consistency group intact.
Syntax
delete consistencyGroup [snapGroupName]
[deleteRepositoryMembers=(TRUE | FALSE)]]
Parameter
Parameter Description
snapConsistencyGroup The name of the snapshot consistency group that
you want to delete. Enclose the snapshot
consistency group name in square brackets ([ ]). If
the snapshot consistency group name has special
203