Description, Syntax, Parameters – Dell PowerVault MD3420 User Manual

Page 241

Advertising
background image

Parameter

Description

enclose the virtual disk name in double quotation
marks (" ").

existingRepositoryLabel

Causes the repository virtual disk to be replaced by
the candidate virtual disk specified.

• The value specified is an existing repository

virtual disk user label. The virtual disk specified

must be an unused repository virtual disk with

the name in the proper form.

• If the newly specified repository virtual disk is

on a different disk pool, the thin virtual disk will

change ownership to that pool.

• The old repository virtual disk will be deleted by

default.

diskPoolUserLabel

Use this parameter to allocate a new repository
virtual disk with the specified capacity.

retainRepositoryMember

If this parameter is set to TRUE, the old repository
is retained. By default, the old repository is deleted.
This parameter is ignored if the existing repository
is reused.

Remove Incomplete Remote Replicated Pair From

Remote Replication Group

Description

This command removes an orphaned replicated pair virtual disk on the storage array. An orphaned
replicated pair virtual disk exists when a member virtual disk in a remote replication group has been
removed on one side of the remote replication group (either the primary side or secondary side) but not
on the other side.
Orphan replicated pair virtual disks are detected when inter-RAID controller module communication is
restored and the two sides of the replication configuration reconcile replication parameters.
Use this command when the replicate relationship is successfully removed on the local or remote
storage array, but cannot be removed on the corresponding storage array because of a communication
problem.

Syntax

remove asyncRemoteReplicationGroup ["asyncRemoteReplicationGroupName"]

incompleteReplication virtualDisk="virtualDiskName"

Parameters

Parameter

Description

asyncRemoteReplicationGroup

The name of the remote replication group that
contains the orphaned virtual disk that you want to
remove. Enclose the remote replication group

241

Advertising