Dell Alienware 14 (Mid 2013) - Manual (Page 12)

12 | Removing the Base Cover
Removing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Close the display, and turn the computer over.
2 Remove the screws that secure the base cover to the computer base.
3 Slide and lift the base cover off the computer base.
1 base cover 2 screws (2)
2
1
book.book Page 12 Monday, June 24, 2013 10:53 AM