Dell Alienware 14 (Mid 2013) - Manual (Page 81)

Replacing the Camera Module | 81
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Adhere the camera module to the display back-cover.
2 Connect the camera cable to the camera-module connector.
3 Tighten the captive screw that secures the camera module to the display back-cover.
Postrequisites
1 Replace the display panel. See "Replacing the Display Panel" on page 78.
2 Replace the display hinges. See "Replacing the Display Hinges" on page 74.
3 Replace the display bezel. See "Replacing the Display Bezel" on page 72.
4 Replace the display assembly. See "Replacing the Display Assembly" on page 70.
5 Follow the instructions from step 5 to step 10 in "Replacing the Palm Rest" on
page 36.
6 Follow the instructions from step 8 to step 10 in "Replacing the Secondary Hard-Drive
(optional)" on page 22.
7 Replace the battery. See "Replacing the Battery" on page 15.
8 Replace the base cover. See "Replacing the Base Cover" on page 13.
9 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 81 Monday, June 24, 2013 10:53 AM