Dell 1320c Network Color Laser Printer - Manual (Page 49)

Manual Duplex Printing from Tray 1
Setting Method for Manual Duplex from Tray 1
When you start manual duplex printing, the instruction windows appears. Note that you cannot display this window again if you close the window. Do not
close the window until duplex printing is complete.
1. First print the even pages. For a six page document, even pages are printed in the order page 6, page 4, then page 2.
The Continue button blinks when the even pages finish printing.
2. Next stack the prints and set them as they are (with the blank side face up) into the paper tray. Pages are printed in the order page 1, page 3, then
page 5.
Manual Duplex Printing From the Single Sheet Feeder
Setting Method for Manual Duplex from the Single Sheet Feeder
When you start manual duplex printing, the instruction windows appears. Note that you cannot display this window again if you close the window. Do not
close the window until duplex printing is complete.
1. First print the even pages.
For a six page document, even pages are printed in the order page 2, page 4, then page 6.
The Continue button blinks when the even pages finish printing.
If paper jam occurs after you select Do Not Print for "Handling manual duplex paper jams" on the Advanced tab in your printer driver, you may not print
document in the right order. In this case, print the document again.
NOTE: Printing on both sides of the paper is not possible if the document consists of various sizes of papers.
NOTE: When printing on curled paper, straighten the paper and then insert it into the single sheet feeder.