Dell 1320c Network Color Laser Printer - Manual (Page 67)

To specify the temperature settings value for the fuser.
Values:
Registration Adjustment
Purpose:
To print the color registration chart and to adjust the color registration by using the chart. This function is required after the printer is set up or moved.
Values:
Plain -2-2 Sets the temperature settings for the fuser for plain paper.
0*
Plain Thick -2-2 Sets the temperature settings for the fuser for thick plain paper.
0*
Covers -2-2 Sets the temperature settings for the fuser for cover paper.
0*
Covers Thick -2-2 Sets the temperature settings for the fuser for thick cover paper.
0*
Label -2-2 Sets the temperature settings for the fuser for labels.
0*
Coated -2-2 Sets the temperature settings for the fuser for coated paper.
0*
Coated Thick -2-2 Sets the temperature settings for the fuser for thick coated paper.
0*
Envelope -2-2 Sets the temperature settings for the fuser for envelopes.
0*
Recycled -2-2 Sets the temperature settings for the fuser for recycled paper.
0*
Coated JPN -2-2 Sets the temperature settings for the fuser for Japanese coated paper.
0*
Postcard JPN -2-2 Sets the temperature settings for the fuser for Japanese postcards.
0*
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply the new settings button to apply the changes.
Auto Registration Adjustment Off Does not adjust the registration automatically.
On* Adjusts the registration automatically.
Auto Correct Click Start to adjust color registration automatically.
Color Regi Chart Click Start to print the color registration chart.
Color Registration Adjustment 1 (Lateral) Yellow -9-9 Specifies the values for the lateral direction that are found in the color registration chart.
0*
Magenta -9-9
0*
Cyan -9-9