Dell 1320c Network Color Laser Printer - Manual (Page 69)

Initialize PrintMeter
Purpose:
To initialize the data for the print meter. After executing this function to automatically restart the printer, the value of the meter resets to 0.
Values:
Web Link Customization
Purpose:
To configure the link used for ordering supplies.
Values:
TCP/IP Settings
Purpose:
To specify the TCP/IP settings for the network.
Values:
Non-Dell Toner Off* Disables the use of refilled toner cartridges.
On Enables the use of refilled toner cartridges.
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply the new settings button to apply the changes.
Initialize PrintMeter Click Start to initialize the print meter.
Select Reorder URL Specifies the URL that Order Supplies at links to in the left frame of the Dell Printer Configuration Web Tool.
Regular* accessories.us.dell.com/sna
Premier premier.dell.com
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply the new settings button to apply the changes.
IP Address Mode AutoIP* Automatically sets the IP address.
DHCP Uses DHCP to set the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
Manually Set Manually sets the IP address.
IP Address Sets the IP address allocated to the printer.
Subnet Mask Sets the subnet mask.
Gateway Address Sets the gateway address.