Crestron electronic TPMC-8T - Manual (Page 38)

Isys i/O™ 8.4” TableTop WiFi Touchpanel Crestron TPMC-8T
“Message Configurations Properties” Window (Popup Messages Tab)
NOTE: The Passcode Messages tab in the “Message Configurations Properties”
window is not applicable to the TPMC-8T and is not used.
There are various types of popup messages. The button associated with each type
(Battery, Biometric and Network) allows you to set which types are displayed.
There are three types of Battery popup messages. Following are definitions of each
message type:
• Low Battery: A yellow popup message appears when battery is low.
• Very Low Battery: A red popup message appears when battery power
is very low.
• Shutting Down: A red popup message appears when battery power is
not sufficient to supply the panel.
There are three types of Biometric popup messages. Following are definitions of
each message type:
• Identification In Progress: A blue popup message appears when
biometric identification is in progress.
• Identification Successful: A green popup message appears when
biometric identification is successful.
• Identification Failed: A red popup message appears when biometric
identification has failed.
There are three types of Network popup messages. Following are definitions of each
message type:
• Connected: A green popup message appears when the panel is
connected to the control system.
34 • Isys i/O™ 8.4” TableTop WiFi Touchpanel: TPMC-8T Operations Guide – DOC. 6567C