Crestron electronic TPMC-8T - Manual (Page 39)

Crestron TPMC-8T Isys i/O™ 8.4” TableTop WiFi Touchpanel
• Checking Connection: A yellow popup message appears when the
panel is experiencing network issues.
• Disconnected, Trying to Reconnect…: A red popup message appears
when the panel loses connection with the control system.
A control for popup message Translucence is also provided. Translucence ranges
from 25% to 100%, with a default value of 90%.
The Default button restores the original Screen Position and Translucence settings,
as well as enabling display of Network messages. A Test Message button lets you
see the changes to popup message position and translucence. Touch Close to close
the popup window.
NOTE: The default value for Screen Position is Lower Left.
Ethernet Details
The Ethernet portion of the setup menu allows configuration of the touchpanel
settings for Ethernet communications.
The Crestron Swirl logo at the top of the Ethernet portion of the setup menu
illuminates to indicate the status of your connection to the control system(s):
• Green Connected
• Yellow Network trouble
• Orange Connected to some but not all of the control systems (listed in IP
table)
• Red Not connected to any control system (listed in the IP table)
Adapters
Touch Adapters to access the “Ethernet Setup” window. To save any changes, use
the Save & Reboot button on the setup menu. The Ethernet address and mask are
displayed on this screen.
NOTE: The adapter listed in the “Ethernet Setup” window will depend on which
adapter came with your TPMC-8X. Either an Atheros or Intel PRO will be displayed,
as shown in the illustrations on the following page.
Operations Guide – DOC. 6567C Isys i/O™ 8.4” TableTop WiFi Touchpanel: TPMC-8T • 35