Cleveland Range The MINI OES-6.08 - Manual (Page 29)

23
C. Pre-Heat
• The Pre-Heat function heats the oven to the desired temperature before loading food, and helps
ensure consistency and quality.
1. Press the Smart Key.
2. Various options appear in the display.
3. Use the Selector Dial to select Pre-Heat .
4. Confirm by pressing the Smart Key.
5. Select “Yes” with the Selector Dial.
6. Confirm “Yes” with the Smart Key.
7. Press the Temperature key and set the pre-heat temperature.
8. Press the Time key and set the pre-heat time.
9. The display shows the Pre-Heat icon
.
10. Pre-heating starts.
D. Vapor Reduction
• The MINI oven must be ON and operating in a cooking mode before Vapor Reduction can be used.
• Vapor Reduction turns on the condenser to reduce the vapor discharge from the MINI.
• Vapor Reduction can be programmed.
1. Press the Smart Key. Various options appear in the display.
2. Use the selector dial to select ‘Vapor reduction’ .
3. Confirm by pressing the Smart Key.
4. Confirm ‘Yes’ with the Smart Key.
5. The required values for the cooking program appear in the display. Enter the values.
6. Press the Smart Key. Vapor Reduction starts.
Recommendations:
• Use Vapor Reduction when there is a lot of exhaust steam for the Steam and Combi modes.
E. Key Lock
• Lock and unlock almost all the keys on the MINI a Personal Identification Number (PIN).
• The following control panel features cannot be locked:
6019002_00
D
and the Press&Go keys.
• The factory setting is “PIN 001”. To change the PIN, please contact your qualified Cleveland
Range authorized service technician.
To Lock:
1. Press the Smart Key.
2. Various options appear in the display.
3. Use the Selector Dial to select the Key Lock function .
4. Confirm by pressing the Smart Key.
5. Select “Yes” with the Selector Dial.
6. Confirm “Yes” with the Smart Key.
7. The display shows "PIN 000”.
8. Use the Selector Dial to select the PIN code.
9. Confirm by pressing the Smart Key.