Swtrackchangestrap, Swipv6changetrap, Swpmgreventtrap – Dell POWEREDGE M1000E User Manual

Page 159: Swfabricreconfigtrap

Advertising
background image

Fabric OS MIB Reference

139

53-1002750-01

sw traps

6

swTrackChangesTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.6

swTrackChangesInfo
swSsn
swVfId

Trap to be sent for tracking log in, log out, or
configuration changes.

#TYPE

Track changes has generated a trap.

#SUMMARY

%s and SSN is #%s

#ARGUMENTS 0, 1
#SEVERITY

Informational

#TIMEINDEX 1
#STATE

Operational

Some of the triggers that will generate this trap are:

Log out

Unsuccessful log in

Successful log in

Switch configuration changes

Track changes on and off

This trap gets sent when track-changes is set to
ENABLED and is configured to send SNMP traps on
track events. Use the trackchangesset command to
enable the track changes feature and SNMP trap
mode.

swIPv6ChangeTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.7

swIPv6Address
swIPv6Status

This trap is generated when an IPv6 address status
change event occurs. It is generated only when IPv6
stateless state changes to the deprecation state and
not for address change notification.

swPmgrEventTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.8

swPmgrEventType
swPmgrEventTime
swPmgrEventDescr
swSsn
swVfId

This trap is generated when any partition manager
change happens. This trap is generated when:

Logical switch is created or deleted.

Port is moved between logical switches.

Switch FID changes.

When any logical switch is changed to base
switch.

VF is enabled or disabled.

swFabricReconfigTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.9

swDomainID

The trap to be sent for tracking fabric
reconfiguration. This trap is generated under the
following circumstances:

Two switches with the same domain ID have
connected to one another.

Two fabrics have joined.

An E_Port has gone offline.

A principal link has segmented from the fabric.

Zone conflicts.

Domain conflicts.

Segmentation of the principal link between two
switches.

Incompatible link parameters. During E_Port
initialization, ports exchange link parameters.
Rarely, incompatible parameters result in
segmentation.

TABLE 44

Trap name and OID

Variables

Description

Advertising