Swnbremport, Swnbbaudrate, Swnbislstate – Dell POWEREDGE M1000E User Manual

Page 170: Swnbislcost, Swnbremportname, Swfabricmemtable, Swididmode, Swpmgreventtype, Swpmgreventtime, Swpmgreventtype swpmgreventtime

Advertising
background image

150

Fabric OS MIB Reference

53-1002750-01

Switch Fabric group

6

swNbRemPort
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.4

Read only

This is the port index on the other end of the ISL.
The physical port number of the remote switch, plus 1. The valid values
for the Brocade 12000, 24000, and 48000 directors are 1 through the
maximum number of ports +1.

swNbBaudRate
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.5

Read only

The baud rate of the ISL. It is always unknown (0).
Possible values are:

other (1) - None of the following.

oneEighth (2) - 155 Mbaud.

quarter (4) - 266 Mbaud.

half (8) - 532 Mbaud.

full (16) - 1 Gbaud.

double (32) - 2 Gbaud.

quadruple (64) - 4 Gbaud.

octuple (128) - 8 Gbaud.

decuple (256) - 10 Gbaud.

sexdecuple (512) - 16 Gbaud

The valid values for the Brocade 12000, 24000, and 48000 directors
switch are 16 (full) and 32 (double).
The valid value for the Brocade 4100 is 64 (quadruple).
The valid values for the Brocade DCX are double (32), quadruple (64),
and octuple (128).

swNbIslState
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.6

Read only

The current state of the ISL. The possible values are as follows.

0 - ISL is down.

1 - ISL is initiating and not yet operational.

2, 3, 4, - Used for notification of internal states.

5 - ISL is active.

swNbIslCost
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.7

Read-write The current link cost of the ISL. In other words, the cost of a link to control

the routing algorithm.

swNbRemPortName
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.8

Read only

The WWN of the remote port.

swFabricMemTable
1.3.6.1.4.1.1588.2.1.1.1
.2.10

Not
accessible

This table contains information on the member switches of a fabric.
Supported in Fabric OS v2.6.1 and not v3.2.0.
This is not available in v6.2.0 and later releases.

swIDIDMode
1.3.6.1.4.1.1588.2.1.1.1
.2.11

Read only

This identifies the status of Insistent Domain ID (IDID) mode. Status
indicating if IDID mode is enabled or not.

swPmgrEventType
1.3.6.1.4.1.1588.2.1.1.1
.2.12

Not
accessible

This indicates partition manager event type. This OID identifies the
following events:

create (0)

delete (1)

moveport (2)

fidchange (3)

basechange (4)

vfstatechange (5)

swPmgrEventTime
1.3.6.1.4.1.1588.2.1.1.1
.2.13

Not
accessible

This object identifies the date and time when any events mentioned in
swPmgrEventType occur, in textual format.

TABLE 48

Object and OID

Access

Description

Advertising