Dell POWEREDGE M1000E - Manual (Page 347)

Fabric OS MIB Reference 327
53-1002750-01
Q-Bridge MIB
18
dot1qTp group
dot1qNumVlans
1.3.6.1.2.1.17.7.1.1.4 Read only The current number of IEEE 802.1Q VLANs that are configured in the
device.
dot1qGvrpStatus
1.3.6.1.2.1.17.7.1.1.5 Read-write The administrative status requested by management for GVRP.
The value enabled (1) indicates that GVRP should be enabled on the
device, on all ports for which it has not been specifically disabled.
When disabled (2), GVRP is disabled on all ports, and all GVRP packets
will be forwarded transparently.
TABLE 127
Object and OID Access Description
dot1qFdbTable
1.3.6.1.2.1.17.7.1.2.1 Not
accessible A table that contains configuration and control information for each
Filtering Database currently operating on the device. Entries in this
table appear automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable.
dot1qFdbEntry
1.3.6.1.2.1.17.7.1.2.1.1 Not
accessible Information about a specific filtering database.
dot1qFdbId
1.3.6.1.2.1.17.7.1.2.1.1.1 Not
accessible The identity of this filtering database.
dot1qFdbDynamicCount
1.3.6.1.2.1.17.7.1.2.1.2 Read only The current number of dynamic entries in this filtering database.
dot1qTpFdbTable
1.3.6.1.2.1.17.7.1.2.2 Not
accessible A table that contains information about unicast entries for which the
device has forwarding or filtering information. This information is used
by the transparent bridging function in determining how to propagate a
received frame.
dot1qTpFdbEntry
1.3.6.1.2.1.17.7.1.2.2.1 Not
accessible Information about a specific unicast MAC address for which the device
has some forwarding or filtering information.
dot1qTpFdbAddress
1.3.6.1.2.1.17.7.1.2.2.1.1 Not
accessible A unicast MAC address for which the device has forwarding or filtering
information.
dot1qTpFdbPort
1.3.6.1.2.1.17.7.1.2.2.1.2 Read only The port number of the port on which a frame having a source address
equal to the value of the corresponding instance of
dot1qTpFdbAddress has been seen. A value of 0 indicates that the port
number has not been learned but that the device does have some
forwarding or filtering information about this address (for example, in
the dot1qStaticUnicastTable).
TABLE 126
Object and OID Access Description