Dell POWEREDGE M1000E - Manual (Page 328)

308 Fabric OS MIB Reference
53-1002750-01
Aggregator port group
17
dot3adAggPortPartnerOpe
rSystemID
1.2.840.10006.300.43.1.
2.1.1.9 Read only A 6-octet read-only MAC address value representing the current value of
the aggregation port's protocol partner's system ID. A value of zero
indicates that there is no known protocol Partner. The value of this
attribute may contain the manually configured value carried in
aAggPortPartnerAdminSystemID if there is no protocol partner.
NOTE: This object is not supported.
dot3adAggPortPartnerAd
minKey
1.2.840.10006.300.43.1.
2.1.1.10 Read-write The current administrative value of the key for the protocol partner. This
is a 16-bit, read-write value. The assigned value is used, along with the
value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and
aAggPortPartnerAdminPortPriority, in order to achieve manually
configured aggregation.
dot3adAggPortPartnerOpe
rKey
1.2.840.10006.300.43.1.
2.1.1.11 Read only The current operational value of the key for the protocol partner. The
value of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminKey if there is no protocol partner. This
is a 16-bit value.
dot3adAggPortSelectedAg
gID
1.2.840.10006.300.43.1.
2.1.1.12 Read only The identifier value of the aggregator that this aggregation port has
currently selected. Zero indicates that the aggregation port has not
selected an aggregator, either because it is in the process of detaching
from an aggregator or because there is no suitable aggregator available
for it to select.
dot3adAggPortAttachedAg
gID
1.2.840.10006.300.43.1.
2.1.1.13 Read only The identifier value of the aggregator that this aggregation port is
currently attached to. Zero indicates that the aggregation port is not
currently attached to an aggregator.
dot3adAggPortActorPort
1.2.840.10006.300.43.1.
2.1.1.14 Read only The port number locally assigned to the aggregation port. The port
number is communicated in LACP PDUs as the actor port.
dot3adAggPortActorPortPr
iority
1.2.840.10006.300.43.1.
2.1.1.15 Read-write The priority value assigned to this aggregation port. This is a 16-bit
value.
dot3adAggPortPartnerAd
minPort
1.2.840.10006.300.43.1.
2.1.1.16 Read-write The current administrative value of the port number for the protocol
partner. This is a 16-bit, read-write value. The assigned value is used,
along with the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and
aAggPortPartnerAdminPortPriority, in order to achieve manually
configured aggregation.
dot3adAggPortPartnerOpe
rPort
1.2.840.10006.300.43.1.
2.1.1.17 Read only The operational port number assigned to this aggregation port by the
aggregation port's protocol partner. The value of this attribute may
contain the manually configured value carried in
aAggPortPartnerAdminPort if there is no protocol partner. This is a 16-bit
value.
dot3adAggPortPartnerAd
minPortPriority
1.2.840.10006.300.43.1.
2.1.1.18 Read-write The current administrative value of the port priority for the protocol
partner. This is a 16-bit, read-write value. The assigned value is used,
along with the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and
aAggPortPartnerAdminPort, in order to achieve manually configured
aggregation.
TABLE 117
object and OID Access Description