Dell POWEREDGE M1000E - Manual (Page 231)

Fabric OS MIB Reference 211
53-1002750-01
Connectivity unit group
9
connUnitRevsTable
1.3.6.1.3.94.1.7 Not
accessible Table of the revisions supported by connectivity units managed by this
agent.
Usage Notes This table lists the versions of hardware and software
elements in the switch.
One entry for the hardware platform version and another entry for the
Fabric OS version. For example, for the Brocade 4100 the hardware
platform number is 32.0. The Fabric OS version for this release is 5.1.
connUnitRevsEntry
1.3.6.1.3.94.1.7.1 Not
accessible Each entry contains the information for a specific revision.
connUnitRevsUnitId
1.3.6.1.3.94.1.7.1.1 Read only The connUnitId value for the connectivity unit that contains this revision
table.
connUnitRevsIndex
1.3.6.1.3.94.1.7.1.2 Read only A unique value among all connUnitRevsEntrys with the same value of
connUnitRevsUnitId, in the range between 1 and connUnitNumRevs.
Index 1 returns the hardware version. Index 2 returns the software
version.
connUnitRevsRevId
1.3.6.1.3.94.1.7.1.3 Read only A vendor-specific string identifying a revision of a component of the
connUnit indexed by connUnitRevsUnitId.
Index 1 returns the switchType from switchShow. Index 2 returns the
Fabric OS version from telnet command version: for example, v2.6.
connUnitRevsDescription
1.3.6.1.3.94.1.7.1.4 Read only Description of a component to which the revision corresponds.
Index 1 returns the hardware version. Index 2 returns the software
version.
connUnitSensorTable
1.3.6.1.3.94.1.8 Not
accessible Table of the sensors supported by each connectivity unit managed by
this agent.
For specific sensor counts on the various switches., refer to
Table 46 on
page 147.
connUnitSensorEntry
1.3.6.1.3.94.1.8.1 Not
accessible Each entry contains the information for a specific sensor.
connUnitSensorUnitId
1.3.6.1.3.94.1.8.1.1 Read only The connUnitId value of the connectivity unit that contains this sensor
table.
Set to connUnitId.
connUnitSensorIndex
1.3.6.1.3.94.1.8.1.2 Read only A unique value among all connUnitSensorEntrys with the same value of
connUnitSensorUnitId, in the range between 1 and the return value from
connUnitNumSensor.
connUnitSensorName
1.3.6.1.3.94.1.8.1.3 Read only A textual identification of the sensor, intended primarily for operator use.
Each contains the name of sensor in textual format: for example, Temp
#1, Fan #2, and so on.
connUnitSensorStatus
1.3.6.1.3.94.1.8.1.4 Read only The status indicated by the sensor.
Possible values are:
•
unknown (1)
•
other (2)
•
ok (3) The sensor indicates okay.
•
Warning (4) - The sensor indicates a warning.
•
failed (5) - The sensor indicates failure.
•
Nominal = 3 (ok).
TABLE 75
Object and OID Access Description