Feature history for radius packet of disconnect, Benefits for radius packet of disconnect, Restrictions for radius packet of disconnect – Cisco 10000 User Manual

Page 358

Advertising
background image

16-56

Cisco 10000 Series Router Software Configuration Guide

OL-2226-23

Chapter 16 Configuring RADIUS Features

RADIUS Packet of Disconnect

To prevent unauthorized servers from disconnecting users, the authorizing agent that issues the POD
packet must include three parameters in its packet of disconnect request. For a session to be
disconnected, all parameters must match their expected values at the router. If the parameters do not
match, the router discards the packet of disconnect packet and sends a NACK (negative
acknowledgement message) to the agent.

The data parameters are the following RADIUS attributes:

User- Name (RADIUS IETF attribute 1)

Framed-IP-Address (RADIUS IETF attribute 8)

Acct-Session-Id (RADIUS IETF attribute 44)

Session-Svr-Key (vendor-proprietary RADIUS attribute 151)

For information about RADIUS attributes, see

Appendix A, “RADIUS Attributes”

.

The RADIUS Packet of Disconnect feature is discussed in the following topics:

Feature History for RADIUS Packet of Disconnect, page 16-56

Benefits for RADIUS Packet of Disconnect, page 16-56

Restrictions for RADIUS Packet of Disconnect, page 16-56

Related Documents for RADIUS Packet of Disconnect, page 16-57

Prerequisites for RADIUS Packet of Disconnect, page 16-57

Configuration Tasks for RADIUS Packet of Disconnect, page 16-57

Monitoring and Maintaining AAA POD Server, page 16-59

Configuration Example for RADIUS Packet of Disconnect, page 16-59

Feature History for RADIUS Packet of Disconnect

Benefits for RADIUS Packet of Disconnect

Ability to terminate an established session

Restrictions for RADIUS Packet of Disconnect

Proper matching identification information must be communicated by the:

Billing server and router configuration

Router’s original accounting start request

Server’s POD request

Cisco IOS Release

Description

Required PRE

12.3(7)XI1

This feature was introduced on the Cisco 10000 series
router.

PRE2

12.2(28)SB

This feature was integrated into Cisco IOS Release
12.2(28)SB.

PRE2

Advertising