Casio YP-100 - Manual (Page 109)

109
You can use the following procedure to restore all of the settings on the Viewer setup menu
(page 41), Wireless setup menu (page 83), and the YC Camera setup menu (page 104) to
their initial default settings.
To restore all settings on the setup menu to their initial
defaults
1 While there is nothing connected to the USB port of the YP-100, press the
[MENU] key.
z This will display the setup menu shown below.
2 Press the [
T T T T] key to move the highlighting to “Restore All Defaults” and then
press the [ENTER] key.
z This displays the dialog box shown below.
3 Use the [
S S S S] key to select “Yes”.
4 To restore all the settings to their initial defaults, press the [ENTER] key.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
5 After you are finished, press the [ESC] key to exit the setup menu.
Returning the Setup Menu to Its Initial Default
Settings