Casio YP-100 - Manual (Page 49)

49
Wireless Function and Wireless Connection Software
The YP-100 has a built-in function named “Wireless”, which you can use to configure YP-
100 settings for wireless LAN connection with a computer, and perform YP-100 operations
(such as displaying connection information, switching computers when there are multiple
computers connected over a wireless LAN, etc.) after a connection is established. Wireless
starts up automatically whenever you connect a CASIO YW-2 wireless adapter to the YP-
100’s USB port.
Wireless Connection is software that runs on a Windows computer. It lets you configure
computer settings for wireless LAN connection with the YP-100, and perform computer
operations (such as sending computer screen contents to the YP-100) after a connection is
established. You can also use Wireless Connection to display the “Web Setup” page for
configuring advanced wireless LAN connection settings (see “Advanced Wireless LAN
Connection Settings” on page 64).
About Connection Profiles
A setup for a wireless LAN connection is called a “connection profile”. There are two types
of connection profiles: “simple connections” and “manual connections”.
The YP-100 comes with a following connection profiles built in. You can use the YP-100’s
Wireless function to switch the current connection profile. Since Wireless Connection is
already equipped with the same Simple Connection 1, 2, and 3 profiles as the Wireless
function, all you need do is select the same profiles with Wireless and Wireless connection
to establish a wireless LAN connection. Note, however, that this is true only when a
CASIO YW-2 wireless adapter is connected to the computer.
About the YP-100’s Wireless LAN
Connection
Profile Initial Profile
Name
Description
Simple
Connection 1
–
These profiles mainly are for establishing a simple
connection between the YP-100 and a single computer with
a CASIO YW-2 wireless adapter. The settings of these
profiles are fixed and cannot be changed.
Simple
Connection 2
–
Simple
Connection 3
–
Manual
Connection 1
Sample 1 These profiles mainly are for wireless LAN connection of
multiple computers to the YP-100 at the same time. The
initial default setup of each profile can be used to configure
a wireless LAN connection, or you can modify the settings
of a profile to improve security and save the profile under
a new name.
Manual
Connection 2
Sample 2
Manual
Connection 3
Sample 3