Casio YP-100 - Manual (Page 50)

50
Establishing a Wireless LAN Connection between the
YP-100 and a Computer
The method you should use to establish a connection between the YP-100 and a
computer depends on the type of connection you want to establish. One important
consideration is whether you want to use a Simple Connection or a Manual Connection
profile.
„ One YP-100 unit and One Computer
In this case, connect using Simple Connection. Make sure that the same Simple
Connection profile (Simple Connection 1 or Simple Connection 2, Simple Connection 3) is
selected on both the YP-100 and on the computer.
If there are multiple 1-to-1 wireless LAN connections in the same area, use a different
connection profile (Simple Connection 1, Simple Connection 2, Simple Connection 3) for
each one.
For more information, see “Establishing a Wireless LAN Connection with a Single Computer
Using a Simple Connection” (page 52).
„ One YP-100 unit and Multiple (Up to 4) Computers
Configure this connection using the Manual Connection Ad Hoc Mode. Make sure that all
of the profile contents (except for the IP address) of the YP-100 and the computer are
identical.
For more information, see “Establishing a Wireless LAN Connection with Multiple Computers
Using a Manual Connection” (page 54).
„ Connection over a Wireless Network
Configure this connection using the Manual Connection Access Point Mode (page 80). Note
that technical knowledge about network connections is required to configure a connection
over a wireless network.
For information about configuring settings, see “To create a new computer connection
profile” (page 74). Supplementary information is also available on the CASIO website
(http://world.casio.com/projector/support/en/).
„ Connection Using a Notebook Computers Built-in Wireless LAN
Use Manual Connection for this type of connection. Note that technical knowledge about
network connections is required to configure a connection over a wireless network.
Supplementary information is available on the CASIO website
(http://world.casio.com/projector/support/en/).