Pro-Ject Audio Systems Pro-Ject Signature 12 User Manual
Page 12
Advertising
Setting the position of cartridge in the headshell:
For setting the correct position of cartridge in headshell grooves we designed for you small tool from
transparent plexiglass. Please note that this tool is only for headshell from Pro-Ject SIGNATURE tonearm.
Step 1: Place the tool with groove to the headshell as shown.
Step 2: Then move the cartridge to the correct position. Correct position is, if the top of the needle is in the
same plane like as comparative plane of tool. This is illustrated in the following picture.
Advertising