Pro-Ject Audio Systems Pro-Ject Signature 12 - Manual (Page 19)

Turntable control is performed by the touch screen.
After turning the switch on, the display shows logo Pro-Ject.
Touching the screen you can control the turntable functions.
Touching on field 33 or 45 select the desired speed. The display shows „WAIT“ .
After reaching rated speed is displayed selected value 33,3 or 45,1 .
Rated speed can be correct by touching the + or –, which changes the value by 0.1 %
Turn off or pause the recording perform is done by touching the STOP.
Please note :
The actual shown speed must not be as the speed in reality. A lot of different possible physical variations may
influence it.
For correct control of turntable speed is supplied Pro-Ject Strobe IT