Pro-Ject Audio Systems Pro-Ject Signature 12 - Manual (Page 17)

6. Anti-skating force adjustment
With the anti-skating slider adjust the position of the arm weight at 45 degrees.
Downforce:
Anti-skating groove:
Lower than 13mN 1
st
from bearing rings
13 - 18 mN 2
nd
from bearing rings
18 - 25mN 3
rd
from bearing ring
7. Adjusting the turntable plane
Put the spirit level on the top of the turntable. With feet that are screw-type balance the turntable.
Control the plane in several directions.
For optimum positioning of a turntable is supplied Pro-Ject LEVEL IT