Pro-Ject Audio Systems Pro-Ject Signature 12 - Manual (Page 18)

8. Connect the turntable to the power supply and amplifier
Turntable is supplied with a power supply suitable for your country’s mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house.
Connect the low voltage plug from the power supply to the socket on the rear of the turntable before
connecting the power supply to the mains.
Signal cabel connect with your phono preamplifier
Red – right channel
White – left channel
9. The turntable control
•
Turn on the switch located in the bottom of plinth