Pro-Ject Audio Systems Pro-Ject Signature 12 - Manual (Page 2)

Pro-Ject SIGNATURE
Your contribution to environmental protection
Disposal of packaging material:
The packaging protects the device against damage during transport. Packaging materials have been selected
with environmental aspects and possibilities of their liquidation and they are recyclable.
Disposal of old device:
Old devices must be collected separately in order to optimise the recovery and recycling of the materials they
contain and reduce the impact on human health and the environment. Consumers should contact their local
authority or retailer for information concerning the correct disposal of their old device.
Controls, features and connections
1. Platter
2. Platter shaft
3. Drive pulley
4. Drive belt
5. Idler pulley shaft
6. Idler pulley
7. Platter belt
8. Transport screws
9. Adjustable feet
10. Tonearm
11. Azimuth set screw
12. VTA locking screw
13. VTA set screw
14. Mounting distance adjusting screw
15. Locking screw for mounting distance adjusting
16. Power supply
17. Control panel
18. ON/OFF switch
The device is transported in a partially disassembled to prevent damage sensitive parts.
Check the packaging and the device immediately if they were not damaged during transport.
Damaged devices not operate.
Compare the data for electrical connection on the plate with the data network.
These data must match in order to avoid damage of the turntable.