Chariot Carriers CX - Manual (Page 26)

26
Slide the drawbar into the drawbar
attachment bracket.
Once the holes of the attachment brak-
ket and the drawbar are aligned with
each other push the securing pin from
below through bracket and drawbar and
lock it by pushing the clip over the pin.
The drawbar is adjustable for three
lengths. Pull out the inner tube and
insert the securing pin when the holes
of inner and outer tube are aligned with
each other.
Fitting the skiing kit: Firstly, remove the
wheel by pressing on the axle knob.
Insert the skier into the hollow axle
while depressing the axle knob and
ensure that the axle safely engages.
6. The Skiing Kit
(for the Corsaire XL, Cheetah, Cougar and CX ):
The assembled sleigh hiker (base + skiing kit) – example Cougar1
6.1 Fitting the Skiing Kit:
Parts supplied:
Skier and drawbar with waist strap