Chariot Carriers CX - Manual (Page 5)

5
This assembly step may only be carried out by a dealer assembling the trailer for the first time.
On the Captain XL the upper frame tubes on each side of passenger compartment are of two-part design. So as to save
space during transit from the factory to the dealer these tubes are not inserted together.
Unpacled from the box, yet
unassembled.
Take off the protective cap before
assembly.
Insert tube ends into one another.
Final assembly
The short piece of tubing at the rear that connects the "W-frame" to the floor pan is of telescopic design.
To continue assembly, first take off the
transport safety lock.
The passenger compartment is then
opened out in line with section 1.1.1. At
the same time the short piece of tubing
illustrated above gets pushed together.
1.1.2 Assembling the passenger compartment of the Captain XL
1.1.2.1 Unpacking and assembling the compartment for the first time
protective cap