Connecting two vcrs, Connecting and installing the tv (continued) – Sony KV-32FV1 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
W
f
Connecting and Installing the TV (continued)
Connecting two VCRs
MONITOR OUT gives you the ability to use a
second VCR to record a program being played
by the primary VCR or to perform tape
editing and dubbing.
1
Connect the VCR intended for playback
using the connection instructions on page
4 of this manual.
2
Using A/V connectors, connect AUDIO
and VIDEO IN on your VCR intended for
recording to MONITOR AUDIO and
VIDEO OUT on your TV.
Notes
• If you will be connecting your A/V
receiver to external speakers, you do not
need to connect AUDIO OUT on your
A/V receiver to AUDIO IN on your TV.
• You cannot record signals from equipment
connected to the Y, P
b
, P
r
input.
Do not change the input
signal while editing through
MONITOR OUT.
(Rear of TV)
VCR (for recording)
OUT@
-i
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S (not supplied)
VMC-810S/820S (not supplied)