Watching the tv, Using the white labeled buttons for tv operatipns – Sony KV-32FV1 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Watching the TV
All of the TV features can be accessed via the remote
control. The following chart will explain the function
of fhe buttons found on your remote control.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the White labeled Buttons for TV Operatipns ■ .
POWER
VTfVDVT 06S/CABLE
CD CO
Press when you want to turn equipment otrand off.
---------- FUNCTION-------------
yTROVr 06S/CABLE TV
CD CD CD
Press when you want to control connected components with your remote control, (see
pages 26-28 for instructions on programming your remote control)
®-(D
and ENTER
Use for direct channel selection. Press 0-9 to select a channel, the channel will
change after 2 seconds, or you can press ENTER for immediate selection.
CH
0
W
Press to scan through the channels.
Keeping the CH + or-pressed allows you to rapidly scan to the desired channel.
JUMP
o
Press to alternate or jump back and forth between two channels. You can jump
between the last two channels selected with the 0-9 keys.
MUTING
o
Press to mute the sound (MUTING will appear on the screen). Press again or press
VOL + to restore sound.
SLEEP
CZ)
Press repeatedly until the TV displays the approximate time in minutes (30, 60, or 90)
that you want the TV to remain on before shutting off automatically.
Cancel by pressing until SLEEP OFF appears.
15