Sony KV-32FV1 - Manual (Page 33)

IVM
Troubleshooting
Consult the table below; it suggests solutions to specific problems.
Sj. t S,» - 'fàÿs,--*
'.Whatyou
You want to restore the TV's
factory settings • First, turn the TV on. Then While pressing the RESET
button on the remote control, press the POWER button
on the T\’. The TV will turn itself off and then back on.
When the TV turns on again, all settings will be reset,
and the Easy Setup Guide will appear.
A red light keeps flashing on the
TV for more than a few seconds • Your TV mayneed service. • Call your local Sony service center.
TV makes a noise when turned
on • This is a normal function of your TV.
Screen is not lit and there is no
sound • Power cord may not be plugged in.
• Batteries may not be inserted correctly.
• TV/VIDEO setting may be incorrect. • Press T\', VIDEO until you recei\ e a channel.
Poor or no picture (screen lit),
good sound
• VIDEO menu settings may not be adjusted correctly.
• Antenna/cable connections may be faulty.
• VIDEO LABEL inputs may be set to WEB. (This label
darkens the screen for ideal WebTV viewing)
• Readjust \ our VIDEO menu settings, (see page 21)
• Check your VIDEO LABEL settings, (see page 25)
Good picture, no sound • Sound may be set to MUTING.
• Your TV may be set to SAP.
• Speaker may not be set correctly. • Press MLTING.
• Check the MTS setting in the AUDIO menu, (see page 22)
• Check your SPEAKER settings, (see page 22)
No color • Color settings may not be adjusted correctly. • Adjust the COLOR settings in the VIDEO menu,
(see page 21)
29