Sony KV-32FV1 - Manual (Page 31)

Tips V
• III some rare cases, you may not he able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment’s own remote control.
• When you remove the batteries, the code number may
revert to the factory setting.
• The code numbers for Sony VCR's are assigned at the
factory as follows:
VHS VCR 301
(preset code for the
supplied remote control)
MDP (Multi Disc Player)
code numbers
DVD (Digital Versatile Disc)
code numbers
8 mm VCR
Beta, ED Beta VCRs
302
303
Manufacturer Code
Sony 701
Panasonic 704, 710
Pioneer 702
Operating an MDP Buttons on the remote
control
To turn on or off Press VTR/DVD (POWER).
To play Press ►.
To stop Press ■.
To pause Press II.
To resume normal playback,
press again or press ►.
To scan Press ►► or ◄◄ during
playback.
To resume normal playback,
press ►.
To search the chapter
forward or backward Press CH +/-.
Tip V
If you will not be programming a DBS or cable box into
the DBS/CABLE function of your remote, you can use it
to program other video equipment (e.g. DVD, MDP, or
second VCR), (see page 26)
Manufacturer Code
Sony 751
Panasonic 753
Pioneer 752
RCA 755
Toshiba 754
Operating a DVD Buttons on the remote
player
control
To turn on or off Press VTR/DVD (POWER).
To play Press ►.
To stop Press ■.
To pause Press II.
To resume normal playback,
press again or press ►.
To scan Press ►► or ◄◄ during
playback.
To resume normal playback,
press ►.
To search the
chapter forward or
backward Press CH +/-.
To select chapters
directly 0-9 + ENTER.
MENU Press to display DVD menu.
To move cursor in Use your arrow buttons
menu
27