Choose the dialing mode, If you aren't sure of your dialing system – Sony SPP-M932 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Use only the supplied AC-T122 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base phone close to the AC outlet so that
you can unplug the AC power adaptor easily.
Notes
Polarity of the plug
Tips
• If your telephone outlet is not modular, contact your
telephone service company for assistance.
• LI is the first phone line connected to center pair of
wires. L2 is the second phone line connected to outer
pair of wires.
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows:
If your dialing system is
Set the switch to
Tone
TONE
Pulse
PULSE
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
Getting Started |
1