Preparing the battery pack, Step 3 – Sony SPP-M932 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 3
Preparing the battery pack
Insert the battery into the handset and charge first before you start
using your phone.
1
Slide open the battery
compartment lid of the handset.
2
Insert the battery pack (with
contacts facing down) into the
battery compartment.
Close the battery compartment
lid.
Place the handset on the base
phone.
The CHARGE lamp on the base
phone lights up when the -
handset is properly seated on
the charge terminals of the base
phone. Charge the battery pack
for more than 8 hours so that
the battery is fully charged.
Advertising