Sony SPP-M932 - Manual (Page 15)

Receiving calls
When you hear the phone ring;
• Press (LINE 1 ) or (LINE 2)
whichever button is flashing.
or
• Pick up the handset from the
base phone when the
handset is placed on the base
phone.
The corresponding button
lights up, so you can tell which
line is used.
When you're done talking, press
(OFF) or replace the handset on
the base phone.
The button goes off.
When calls come to line 1 and line
2 at the same time
The phone rings with the line which
comes in first. When you pick up
the handsef from the base phone,
the line which comes in first will be
connected.
Additional tasks
To Do this
Pul a cal! on hold
A beep sounds every 20 seconds to inform you that
the line is put on hold.
Press
( LINE 1) or C LINE 2) to resume the
conversation.
Switch to another call on
the same line
(''call waiting" service*)
Press ( LINE 1) or C LINE 2) for the current call to
"FLASH" to the new caller.
Press the button again to get back to the first caller.
* Contact your telephone company to subscribe to this service.
Basics