Adding m^ory, Adding memory – Sony PCV-90 User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adding Memory
Adding M^ory
You can install additional SIMMs (single in-line memory modules) in
your PC, to a maximum of 128 megabytes (MB).
Note
^ You must install SIMMs in pairs. Fill each memory bank with SIMMS of the same
type (Fast Page or EDO), speed (60 ns), and size (4, 8,16, or 32 MB).
Total System
1 Memory in Bank 0^
Memory in Bank V
Memory
Socket 1
Socket 2
Socket 1
Socket 2
32 MB*
16 MB
16 MB
Empty
Empty
40 MB
16 MB
16MB
4 MB
4 MB
48 MB
SMB
SMB
16 MB
16 MB
64 MB
16 MB
16 MB
16 MB
16 MB
64 MB
32 MB
32 MB
Empty
Empty
72 MB
32 MB
32 MB
4 MB
4 MB
80 MB
SMB
SMB
32 MB
32 MB
96 MB
16 MB
16 MB
32 MB
32 MB
128 MB
:32 MB
32 MB
32 MB
32 MB
32 MB is the default memory amount for PCV-70 and PCV-90.
*
The memory options in Bank 0 and Bank 1 are interchangeable.
Caution
Make sure you observe the proper safety precautions when you add SIMMs to your
Sony PC. See "Notes on Use" on page 109.
To install memory
1
Shut down your PC, turn off all peripheral devices, such as your
printer, display, and speakers, and then unplug your PC.
2
Remove the side and rear panels as described on pages 90-91.
3
If necessary, remove any add-in cards or other components to access
the SIMM sockets.
4
Handle the SIMM only by the edges, and remove it from its anti-static
package.
95