Removing the cover, To remove the left side panel – Sony PCV-90 User Manual

Page 97

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Upgrading and Maintaining Your Sony PC

Removing the Cover

To insert an add-in board, add memory, or replace the lithium battery,
you need to open your Sony PC. You must remov'e the panels in a specific
order: the left side panel, the rear panel, and the I/O bracket.

Note

When replacing the lithium battery, you must perform some initial steps before

removing the cover. See "Replacing the Lithium Battery" on page 97 for details.

To remove the left side panel

1

Push the rear latch to release the left side panel.

2

Slide the panel back until it stops.

3

Pull the panel straight out to remove it.

90

Advertising
This manual is related to the following products: